Glentor D50
Machine D50
{acf_typ_stroje_en} D50
A practical addition to your machine
- Additional drilling equipment
- Easy connection to the machine
- Drilling, DTH pre-drilling
- Max. 5,000 Nm
- Max. 2.5m screw
01 | Description
The D50 is not a stand-alone machine, but a powerful attachment designed for installing ground screws. Thanks to its compact dimensions and low weight of 480 kg, it is easy to transport and is the ideal solution where a large stand-alone machine is not needed, but reliable performance is required.
The device achieves a torque of 5,000 Nm at 37 rpm, which is enough power to drive screws up to 2.5 meters long. The pressing force of 6,350 N allows stable and precise work even in more demanding conditions.
02 | Specification
| Post Title | Post Date |
|---|---|
torque{acf_specifikace_nazev_en} | 5 000 Nm / 37 rpm{acf_specifikace_hodnota_en} |
pressing force{acf_specifikace_nazev_en} | 6 350 N{acf_specifikace_hodnota_en} |
screw/pile length{acf_specifikace_nazev_en} | 2,5 m{acf_specifikace_hodnota_en} |
weight{acf_specifikace_nazev_en} | 480 kg{acf_specifikace_hodnota_en} |
transport dimensions (w × h × d){acf_specifikace_nazev_en} | 1 040 x 3 216 x 694 mm{acf_specifikace_hodnota_en} |
pressure/flow{acf_specifikace_nazev_en} | 200 bar / 70 l/min{acf_specifikace_hodnota_en} |
carriage tilt side/front{acf_specifikace_nazev_en} | ±15°{acf_specifikace_hodnota_en} |
03 | Accessories
Tool box
Tool box
Screw adapters*
Screw adapters*
