Pergolas and shelters
Driving load-bearing ground screws for garden pergolas and shelters. The machine allows quick installation without digging and concrete.
Glentor A70 - Compact mobile screwing machine
{acf_typ_stroje_en} A70
7,000 Nm
The most compact in the series
The machine weighs a mere 1,700 kg with transport dimensions of 902 × 2,000 × 2,500 mm. Thanks to its compact design, it easily fits onto smaller construction sites and requires minimal maneuvering space. It is the only choice when you have limited site access.
Confined space entry
Ideal for gardens, yards, narrow plots, and areas with space constraints. The compact dimensions allow for transport and deployment even in hard-to-reach locations where large machines cannot go.
Front loading with precise setting
Precise positioning of the ground screw thanks to the front installation system with the possibility of carriage tilt adjustment:
- Lateral tilt: ±18°
- Forward tilt: 8°
This setting allows easy adaptation to sloping terrain.
DTH pre-drilling for hard soils
Integrated DTH (Down-The-Hole) pre-boring can handle even very solid soil profiles, layered soils, and fractured rocks without the risk of machine failure. The technology uses a hydraulic hammer to break up hard bedrock and compressed air from an attachment to remove material from the drilled area.
Wireless remote control
The operator controls all functions remotely without physical contact with the machine. This ensures safety on the site and eliminates the risks associated with direct handling.
Description
Model A70 is the most compact screwdriving machine in our offer. Thanks to its size and weight 1,700 kg it is easy to transport and ideal where it is necessary to reach even hard-to-reach places. Nevertheless, it offers sufficient performance for reliable and precise foundation work on smaller structures.
The machine works with infinitely variable torque up to 7,000 Nm, which allows it to drill effectively even in solid soil profiles. Maximum screw length 2.55 m it is optimal for pergolas, smaller wooden structures, fences or prefabricated structures.
The transport dimensions of the machine are 902 × 2,000 × 2,500 mm, which ensures easy handling even during transport.
Why Choose Glentor A70
The most compact in the series
The machine weighs a mere 1,700 kg with transport dimensions of 902 × 2,000 × 2,500 mm. Thanks to its compact design, it easily fits onto smaller construction sites and requires minimal maneuvering space. It is the only choice when you have limited site access.
Confined space entry
Ideal for gardens, yards, narrow plots, and areas with space constraints. The compact dimensions allow for transport and deployment even in hard-to-reach locations where large machines cannot go.
Front loading with precise setting
Precise positioning of the ground screw thanks to the front installation system with the possibility of carriage tilt adjustment:
- Lateral tilt: ±18°
- Forward tilt: 8°
This setting allows easy adaptation to sloping terrain.
DTH pre-drilling for hard soils
Integrated DTH (Down-The-Hole) pre-boring can handle even very solid soil profiles, layered soils, and fractured rocks without the risk of machine failure. The technology uses a hydraulic hammer to break up hard bedrock and compressed air from an attachment to remove material from the drilled area.
Wireless remote control
The operator controls all functions remotely without physical contact with the machine. This ensures safety on the site and eliminates the risks associated with direct handling.
Technical Specifications
| Post Title | Post Date |
|---|---|
Engine{acf_specification_name_en} | Kohler ECH980{acf_specification_value_en} |
Engine power{acf_specification_name_en} | 28 kW{acf_specification_value_en} |
Torque{acf_specification_name_en} | 7,000 Nm @ 13 rpm 6,000 Nm @ 20 rpm 3,000 Nm @ 45 rpm{acf_specification_value_en} |
contact pressure{acf_specification_name_en} | 5,000 N{acf_specification_value_en} |
Maximum screw length{acf_specification_name_en} | 2.55 m{acf_specification_value_en} |
machine weight{acf_specification_name_en} | 1,700 kg{acf_specification_value_en} |
transport dimensions (W × H × L){acf_specification_name_en} | 902 × 2,000 × 2,500 mm{acf_specification_value_en} |
Hydraulics — Pressure{acf_specification_name_en} | 320 bar{acf_specification_value_en} |
Hydraulics — Flow Rate{acf_specification_name_en} | 47 l/min{acf_specification_value_en} |
Hydraulics — Tank Capacity{acf_specification_name_en} | 70 L{acf_specification_value_en} |
travel speed{acf_specification_name_en} | 3 km/h{acf_specification_value_en} |
Gun mount tilt — lateral{acf_specification_name_en} | ±18°{acf_specification_value_en} |
Carriage elevation — front{acf_specification_name_en} | 8°{acf_specification_value_en} |
chassis{acf_specification_name_en} | Caterpillar{acf_specification_value_en} |
Controls{acf_specification_name_en} | Wireless remote control{acf_specification_value_en} |
Emissions Standard{acf_specification_name_en} | Stage V{acf_specification_value_en} |
Areas of Application
The Glentor A70 machine is used primarily in the following applications:
Photo gallery
Comparison of the Glentor series models
| Parameter | A70 | |||
|---|---|---|---|---|
| Type | Self-propelled | Self-propelled | Self-propelled | Attachment |
| Engine | Kohler, 28 kW | Hatz, 43.7 kW | Hatz, 43.7 kW | None |
| Torque | 7,000 Nm | 8,000 Nm | 6,500 Nm | 5,000 Nm |
| Weight | 1,700 kg | 2,480 kg | 3,050 kg | 480 kg |
| Max. screw length | 2.55 m | 2.5 m | 3.5 m | 2.5 m |
| Hammer | No | No | Year (900 J) | No |
| Foundation type | Frontal | Frontal | Lateral | - |
When to choose the A70? When you need compactness, a lower price, and work with screws up to 2.55 meters. Ideal for smaller construction sites and restricted access locations.
Accessories
The Glentor A70 comes standard with the following accessories:
- Toolbox — complete set of tools for maintenance and assembly
- Telematics unit — remote monitoring, diagnostics and parameter recording
- Clamping jaws for screw centering - precise setting and driving of the screw
The machine can be equipped with the following optional equipment:
- Screw adapters — expansion of compatibility with various types and diameters of ground screws
- DTH pre-boring — capacity expansion for very hard soils and stones
- Preventer — machine protection against drilled soil
- Rinsing head — compressed air supply for DTH pre-drilling
- Recording and editing system - digital borehole parameter recording and reports
Download
All documents are available in Czech or, if applicable, in English.
Frequently Asked Questions
What projects is the A70 suitable for?
The Glentor A70 is designed for smaller construction sites and projects in confined spaces. Ideal applications include pergolas, fences, extensions, small timber structures, and prefabricated buildings. The machine is also suitable for applications where heavy machinery access is limited and you need a compact solution.
What is the difference between A70 and B80?
Model B80 is heavier (2,480 kg vs 1,700 kg), more powerful (43.7 kW vs 28 kW) and offers higher torque (8,000 Nm vs 7,000 Nm). The B80 is designed for medium-sized projects with more demanding soils and deeper drilling (up to 2.5 m). The A70, on the other hand, excels in compactness, mobility and a lower price. Choose the A70 if you have limited space; choose the B80 if you need higher performance.
Can the A70 handle hard soil?
Yes. The machine has a maximum torque of 7,000 Nm, which is sufficient for standard hard soils. In addition, it is possible to add a DTH pre-drilling attachment for very hard profiles and stones without the risk of machine breakdown.
How is the A70 transported?
The machine is self-propelled with a travel speed of 3 km/h. For longer distances, it is transported on a small trailer (can be single-axle). Compact transport dimensions (902 × 2,000 × 2,500 mm) also allow transport on Class B trailers.
Do I need training for operation?
We recommend completing operator training. Glentor offers basic training for screw driving machine operators, which covers machine operation, maintenance, and safety when working with the remote control.
What is the warranty?
Glentor provides a 1-year warranty covering manufacturing defects. Normal wear and tear, and maintenance (oil and filter changes) are handled by the operator. An extended warranty (max. 24 months) is available upon agreement.
What is the delivery time?
Standard: 12–14 weeks from order.
Rental: possible upon agreement.Can the A70 be rented?
No. We currently do not provide rental services.
How is the machine maintained?
Maintenance is carried out according to the schedule contained in the manual:
- Daily maintenance — oil, cooler, and hydraulics check (5 minutes)
- Weekly maintenance — filter cleaning, leak check (30 minutes)
- Monthly maintenance — machine cleaning, transmission oil check (1–2 hours)
- Annual service — complete inspection, engine maintenance, calibration (1–2 days)
Glentor provides spare parts and service support throughout the entire service life of the machine.
Inquiry form
I am interested in Glentor A70
Fill out the form and our team will send you a non-binding offer within 24 hours.
Čeština 
English 
English (UK) 
Deutsch 
Deutsch (Österreich) 
Deutsch (Schweiz) 
Polski 
Français 
Español 
Українська 
Tiếng Việt 
Română 
Български 
Nederlands (Formeel) 
Português 
Svenska 
Hrvatski 
Italiano 
Magyar 
Türkçe 
Suomi 
Latviešu valoda 
Lietuvių kalba 
Eesti