Pergolas and carports
Screw-in ground screws for garden pergolas and canopies. The machine allows for rapid installation without excavation and concrete.
Glentor A70 (test) - Compact mobile drilling machine
{acf_typ_stroje_en} A70 (test)
7,000 Nm
The most compact in the range
The machine weighs just 1,700 kg with transport dimensions of 902 × 2,000 × 2,500 mm. Thanks to its compact design, it easily fits onto smaller construction sites and requires minimal manoeuvring space. It is the only choice when you have limited access to the construction site.
Access to confined spaces
Ideal for gardens, yards, narrow plots, and spaces with limited room. Compact dimensions allow for transport and deployment even in hard-to-reach locations where larger machinery cannot go.
Frontal alignment with precise setting
Precise positioning of the ground screw thanks to the face mounting system with adjustable tilt on the carriage:
- Lateral tilt: ±18°
- Front tilt: 8°
This setting allows for easy adaptation to undulating terrain.
DTH pre-drill bit for hard soils
The integrated DTH (Down-The-Hole) pre-drilling tool can handle very firm soil profiles, folded soils, and fractured rocks without the risk of machine failure. The technology uses a hydraulic hammer to break up hard substrata and compressed air from an auxiliary unit to remove material from the drilled area.
Wireless remote control
The operator checks all functions remotely without physical contact with the machine. This ensures safety on the construction site and eliminates risks associated with direct handling.
Description
Model A70 is the most compact screw pile driver in our range. Thanks to its size and weight 1.7 tonnes It is easily transportable and ideal where hard-to-reach places need to be accessed. Nevertheless, it offers enough power for reliable and precise construction of smaller structures.
The machine is working with infinitely variable torque up to 7,000 Nm, which allows it to effectively drill even in solid soil profiles. Maximum screw length 2.55 m is optimal for pergolas, smaller timber structures, fences or prefabricated constructions.
The transport dimensions of the machine are 902 × 2,000 × 2,500 mm, which ensures easy handling even during transport.
Why choose Glentor A70 (test)
The most compact in the range
The machine weighs just 1,700 kg with transport dimensions of 902 × 2,000 × 2,500 mm. Thanks to its compact design, it easily fits onto smaller construction sites and requires minimal manoeuvring space. It is the only choice when you have limited access to the construction site.
Access to confined spaces
Ideal for gardens, yards, narrow plots, and spaces with limited room. Compact dimensions allow for transport and deployment even in hard-to-reach locations where larger machinery cannot go.
Frontal alignment with precise setting
Precise positioning of the ground screw thanks to the face mounting system with adjustable tilt on the carriage:
- Lateral tilt: ±18°
- Front tilt: 8°
This setting allows for easy adaptation to undulating terrain.
DTH pre-drill bit for hard soils
The integrated DTH (Down-The-Hole) pre-drilling tool can handle very firm soil profiles, folded soils, and fractured rocks without the risk of machine failure. The technology uses a hydraulic hammer to break up hard substrata and compressed air from an auxiliary unit to remove material from the drilled area.
Wireless remote control
The operator checks all functions remotely without physical contact with the machine. This ensures safety on the construction site and eliminates risks associated with direct handling.
Technical specification
| Post Title | Post Date |
|---|---|
Motor{acf_specifikace_nazev_en} | Kohler ECH980{acf_specifikace_hodnota_en} |
Engine Power{acf_specifikace_nazev_en} | 28 kW{acf_specifikace_hodnota_en} |
Torque{acf_specifikace_nazev_en} | 7,000 Nm @ 13 rpm 6,000 Nm @ 20 rpm 3,000 Nm @ 45 rpm{acf_specifikace_hodnota_en} |
Clamping force{acf_specifikace_nazev_en} | 5,000 N{acf_specifikace_hodnota_en} |
Maximum screw length{acf_specifikace_nazev_en} | 2.55 m{acf_specifikace_hodnota_en} |
Machine weight{acf_specifikace_nazev_en} | 1.7 tonnes{acf_specifikace_hodnota_en} |
transport dimensions (w × h × d){acf_specifikace_nazev_en} | 902 × 2,000 × 2,500 mm{acf_specifikace_hodnota_en} |
Hydraulics — Pressure{acf_specifikace_nazev_en} | 320 bar{acf_specifikace_hodnota_en} |
Hydraulics — Flow{acf_specifikace_nazev_en} | 47 litres per minute{acf_specifikace_hodnota_en} |
Hydraulics — tank volume{acf_specifikace_nazev_en} | 70 litres{acf_specifikace_hodnota_en} |
Travel speed{acf_specifikace_nazev_en} | 3 km/h{acf_specifikace_hodnota_en} |
Mast tilt - lateral{acf_specifikace_nazev_en} | ±18°{acf_specifikace_hodnota_en} |
Mast tilt – front{acf_specifikace_nazev_en} | 8°{acf_specifikace_hodnota_en} |
undercarriage{acf_specifikace_nazev_en} | Tracked{acf_specifikace_hodnota_en} |
Control{acf_specifikace_nazev_en} | Wireless remote control{acf_specifikace_hodnota_en} |
Emissions standard{acf_specifikace_nazev_en} | Stage V{acf_specifikace_hodnota_en} |
Areas of use
The Glentor A70 machine is primarily used in the following applications:
Photo gallery
Video presentation
Comparison of Glentor series models
| Parameter | A70 | |||
|---|---|---|---|---|
| Type | Self-propelled | Self-propelled | Self-propelled | Additional device |
| Motor | Kohler, 28 kW | Hatz, 43.7 kW | Hatz, 43.7 kW | None |
| Torque | 7,000 Nm | 8 000 Nm | 6,500 Nm | 5,000 Nm |
| Mass | 1.7 tonnes | 2,480 kg | 3 050 kg | 480 kg |
| Max. screw length | 2.55 m | 2.5 metres | 3.5m | 2.5 metres |
| Hammer | No | No | Yes (900 J) | No |
| Front/side loading | Front | Front | Side | - |
When to choose the A70? When you need compactness, a lower price, and work with screws up to 2.55 metres. Ideal for smaller constructions and restricted access locations.
Accessories
The Glentor A70 is supplied as standard with the following accessories:
- Tool box — Complete tool kit for maintenance and assembly
- Telematics Unit — remote monitoring, diagnostics and parameter recording
- Screw centering clamps — precise setting and guidance of the screw
The machine can be equipped with the following optional accessories:
- Screw adaptors — expanded compatibility with various types and diameters of ground screws
- DTH drilling — capacity extension for very hard soils and stones
- Preventer — protection of the machine from excavated soil
- Purge head compressed air supply for DTH pre-drilling
- Recording and editing system digital recording of borehole parameters and reports
Download
All documents are available in Czech, or in English.
Frequently Asked Questions
Can the A70 be rented?
No. We currently do not provide rental services.
How is the machine maintained?
Maintenance is carried out according to the plan contained in the manual:
- Daily Maintenance — oil, radiator, hydraulics check (5 minutes)
- Weekly maintenance — cleaning filters, checking for leaks (30 minutes)
- Monthly maintenance Machine purging, gearbox oil check (1–2 hours)
- Annual service — Complete inspection, engine maintenance, calibration (1–2 days)
Glentor provides spare parts and service support throughout the entire lifespan of the machine.
Related content
Articles and information about the Glentor model A70 (test)
Enquiry form
I am interested in Glentor A70 (test)
Fill in the form and our team will send you a no-obligation quote within 24 hours.
Čeština 
English 
English (UK) 
Deutsch 
Deutsch (Österreich) 
Deutsch (Schweiz) 
Polski 
Français 
Español 
Українська 
Tiếng Việt 
Română 
Български 
Nederlands (Formeel) 
Português 
Svenska 
Hrvatski 
Italiano 
Magyar 
Türkçe 
Suomi 
Latviešu valoda 
Lietuvių kalba 
Eesti